NEWS
新闻中心
NEWS
新闻中心
CONTACT
联系我们

Contact Person: Miss Wang

Phone: 15999898070

Telephone: 0769-87883409

Email: [email protected]

Address: Room 101, Building 4, No.8 Qinghe Road, Huangjingkeng, Huangjiang Town, Dongguan City, Guangdong Province

INDUSTRY

Zaozhuang where to buy automatic terminal machine

Author:Dongguan julun Machinery Co., Ltd. View:0 Time:2021-07-24

Where to buy an automatic terminal machine in Zaozhuang

The ultra-high-speed silent peeling and tapping machine in the workshop is a fixed asset. The use date is March 2012, and the life span is 10 years. Its original value is 18,000 yuan. It is a general enterprise production equipment. /span>Strip terminal machineThe straight-line method is used to accrue depreciation, and the monthly depreciation amount=18000*(1- 3%)/10/12=145.50. The use date is from March 2012 to July 2013, which is 9+7=16 months, and the depreciation amount in July 2013=145.5*16=2328 yuan.


2024新澳门原料站


2024新澳门原料站


2024新澳门原料站


Special terminal machines can be classified into pneumatic terminal machines, terminal machines, ultra-quiet terminal machines, intelligent terminal machines, continuous terminal cutting PIN machines, stripping and punching terminal machines, semi-automatic super Silent terminal machine, wire cutting and stripping machine, terminal block machine, stripping machine, small diamond terminal machine, series motor stator terminal machine, computer wire automatic stripping machine, pin terminal machine, gold wire terminal machine, etc. After pressing the terminal, check whether the terminal is qualified or not, it needs to pass the terminal pick-up surface analyzer [1], the process is divided into: cutting-grinding and polishing-electrolysis (corrosion)

The advanced structure design of the terminal machine: Breaking the traditional automatic mechanical work flow layout, the cutting, stripping, end punching, and twisting are highly integrated in a straight line. Greatly increase work efficiency and product quality. 3. The terminal machine has a stable structure and low cost of use: As it effectively reduces the large-span cooperation between personnel and various departments in the traditional operation process, the mechanical transmission running-in is reduced, and the unstable factors are greatly reduced. The simplification of the structure greatly reduces the follow-up maintenance cost. So as to produce products more quickly.

Continuous stripping terminal machine: The continuous stripping terminal machine belongs to the semi-active model. It has the function of active peeling and crimping terminals. After manual feeding, the foot pedal power switch is controlled to complete the operation. The output power is relatively high. The machine has the functions of active peeling and crimping. During the operation, manual feeding is required, and the pedal method is required, and the production power is high. The quotation is cheaper than the quotation of all active terminal machines.

Advanced PLC or single-chip control system, self-shutdown, self-alarm and self-diagnosis for failure, safe and simple to use. Automatically display the number of packages, which can conveniently count the workload of the machine. The special terminal machine has many advantages compared with the general terminal machine, and the ultra-high speedAutomatic terminal machineMore characteristic than the automatic terminal machine. The following specifically introduces its advantages in three aspects. 1. The advanced production efficiency of the fully automatic terminal machine: Because the operating mechanisms are integrated in a straight line, the production time of a single electronic wire is reduced, and the production capacity is surprisingly doubled compared with the traditional model, reaching 7000 per hour (100 length) Within

Special terminal machine and wire harness processing equipment are fully automatic terminal crimping machines nationwide. Terminal machine. Wire cutting machine. Cassette mode. The blade waits for someone to do better. Dongguan Julun Machinery Co., Ltd. is committed to the research, development, manufacturing and sales of automatic wire processing machinery and equipment. The product range includes automatic single-head terminal machine, automatic double-head terminal machine, continuous stripping terminal machine, ultra-quiet terminal machine, computer wire stripping machine, high-speed wire cutting machine, pipe cutting machine, wire binding machine, etc. Products are exported to Southeast Asia, Europe and the United States. Sincerely welcome new and old customers to come to discuss cooperation.


2024新澳门原料站


Where to buy an automatic terminal machine in Zaozhuang

The stripper and terminal machine must be shut down when adjusting and replacing the paper cutter. Even when the machine is stopped, it is strictly forbidden to put your hands under the knife to change the knife. Long-handled bolts and other tools should be used to change the knife. They must be removed during the test run to avoid injury to the operator when the machine is started. 2. The power supply must be blocked when the stripping terminal machine is adjusted, the blade is exchanged, and when repairing, refueling, scrubbing and inspection.

Where to buy an automatic terminal machine in Zaozhuang


2024新澳门原料站


2024新澳门原料站


This kind of special terminal machine is equipped with a foot-operated ionization 2113 switch, because when the terminal machine is running, its motor will continue to operate, every time it is stepped on The pedal will give an "O" power off signal. This is a type of our common terminal 5261 machine. The special terminal machine can also be called a terminal crimping machine or a terminal crimping machine. As companies move towards automated production, the terminal machine market in recent years has been occupied by the 4102 automatic terminal machine for most of the market.

Turn on the power switch of the automatic terminal, and the power indicator light is on. Pay attention to whether there are obvious abnormal noises inside and outside the machine. If the operation is suspended, ask the maintenance personnel to determine whether maintenance is required. Knife selection and installation: operated by designated personnel. Before installing the tool, you need to manually compare whether the selected tool matches. The tool can only be installed after the comparison is correct. After installing the tool, it must be tested manually.


2024新澳门原料站


Check whether the power supply voltage of the terminal machine is consistent with the specified voltage (220V). Fix the terminal roll and guide the terminal into the die through the guide plate. Adjust the crimping height and manually operate the pressure test terminal. After turning the spindle into place with an open-end wrench, remove the open-end wrench. 2. Manual operation of Dongguan Julun automatic terminal machine: Turn the operation switch to the adjustment position (POWEROFF) and the motor will not run at this time. Insert the open-end wrench into the spindle from the rear box door, and press the manual button (ADJUST) solenoid to attract it. The open-end wrench rotates clockwise to drive the main shaft to rotate one round, the main machine slide block moves up and down to complete a stroke, and a terminal is crimped. Keep pressing the manual button (ADJUST) to turn it in place continuously, and then remove the open-end wrench.


2024新澳门原料站


The principle of the automatic terminal stripping machine is: after the metal wire is input to the wire feeding wheel through the straightening machine, the wire feeding roller is driven by the stepping motor, and the lower right roller will make The processing line moves left and right; the blade is driven by a stepping motor, and the up and down directions are opposite. In terms of control, after the interval between the lower blades of the terminal machine, the functions of stripping and trimming can be realized. The stepping motor drives the upper left roller and the lower roller (the twisting wheel and the appearing roller physically refer to the same liquid wheel) to move back and forth in opposite directions to achieve the torque function. The fault of the terminal machine is briefly introduced into three parts: peeling fault, terminal fault and soldering fault.

Where to buy an automatic terminal machine in Zaozhuang

First, turn off the power of the automatic terminal machine, press the down touch button, and use the special board to manually move the master and slave wheels to greatly increase the original imported terminal pressure The punching stroke of the machine. If the hand does not move, consider whether the pressure is too high or there are other problems, check and adjust to normal. Before operation, check and confirm that the locking screws are not loose.

Where to buy an automatic terminal machine in Zaozhuang


2024新澳门原料站


The automatic terminal machine has won the favor of the majority of enterprises for its high efficiency, hands-free, high precision, and ultra-quiet advantages. Of course, 1653 must choose the right one according to the needs of your own business. Hope it helps you. For the application and principle of the terminal machine, please refer to the product data of Dongguan Julun Machinery Co., Ltd. Hope to help you all. Our company's products are mainly companies that include stripping and tapping machines and pressure monitoring. You are also warmly welcome to call and write to us for consultation.


Where to buy automatic terminal machine in Zaozhuang


2024新澳门原料站


Tighten the round nut after adjusting the terminal machine. Safety inspection of Julun automatic terminal machine before operation: confirm that the wrench has been removed. Tighten the round nut after adjustment. Julun automatic terminal machine works normally: Press the operating switch to the working position, the motor starts to run, and the wire is placed in the proper position of the terminal crimping position (the crimped terminal must be in the middle of the upper and lower die cutters). Step on the foot switch, the main unit slides down, complete the crimping of the wire and the terminal, and send the next terminal to the crimping position. Repeat the above steps to achieve continuous crimping between the wire and the terminal.



News
Related Product
Online Service
contact details

contact number:

0769-87883409

Pre-sales advice:

15999898070

Business mailbox:

[email protected]

QR code
C S